To measure the height of high heels, there are a few methods you can use:
- Place the shoe on a flat surface, such as a table, desk, or the floor. Measure from the top of the heel cap to the bottom of the heel where it meets the sole using a tape measure or ruler. [1,2,3]
- Find the height of the heel by measuring it from the floor to where it connects with the upper. Heel stoppers do not count to the height. [4]
- Measure the back of the heel from the bottom of the heel to the point where it connects to the shoe. [5]
Note: When measuring the heel height, heel stoppers or platforms at the front of the shoe should not be included in the measurement.
This image is property of anjaliesa.com.
Methods for Measuring Height of High Heels
Comparing Heel Height with Standard References
When it comes to measuring the height of high heels, one of the easiest methods is to compare them with standard references. This method involves using existing shoes or manufacturer specifications as a benchmark. One option is to refer to a shoe sizing chart, which provides information on the corresponding heel heights for different shoe sizes. By comparing the high heels to existing shoes with known heel heights, you can gain a good estimate of their height.
Using a Measuring Tape
Another method for measuring the height of high heels is by using a measuring tape. This method requires measuring from the bottom of the heel to the top. Simply place the measuring tape against the back of the heel and extend it to the highest point of the heel. This will give you an accurate measurement of the heel height in inches or centimeters.
Using a Ruler
Using a ruler is another simple and convenient method for measuring the height of high heels. To measure the heel height, place the ruler against the sole of the shoe and extend it vertically until it reaches the highest point of the heel. Make sure the ruler is held firmly against the shoe to ensure an accurate measurement. By measuring from the sole to the top of the heel, you can determine the height of the high heels.
Using a Caliper
A caliper can be a helpful tool for measuring the height of high heels, especially if you want precise measurements. This method involves using the caliper to measure the increase in height from the start of the heel to the highest point. Additionally, you can also use the caliper to measure the pitch angle of the heel, which refers to the angle between the ground and the front edge of the heel. By using a caliper, you can obtain accurate and detailed measurements of high heel heights.
Measuring from the Sole to the Heel
Measuring from the sole to the heel is another method for determining the height of high heels. This method can be done using either a measuring tape or a ruler.
To measure using a tape, place the tape at the sole of the shoe and extend it vertically until it reaches the highest point of the heel. Take note of the measurement, and you will have an accurate height measurement.
Using a ruler follows a similar process. Simply place the ruler against the sole of the shoe and extend it vertically until it reaches the highest point of the heel. Make sure the ruler is firmly against the shoe to ensure an accurate measurement.
Measuring from the Bottom of the Heel to the Top
This method involves measuring the height of high heels from the bottom of the heel to the top. It can be done using either a measuring tape or a ruler.
To measure using a tape, place the tape against the back of the heel and extend it to the highest point. Take note of the measurement, and you will have an accurate height measurement.
Using a ruler follows a similar process. Place the ruler against the back of the heel and extend it vertically until it reaches the highest point. Ensure the ruler is held firmly against the shoe for an accurate measurement.
Measuring from the Floor to the Heel
If you want to measure the height of high heels relative to the floor, this method is for you. Using a measuring tape, start from the floor and measure vertically until you reach the heel’s highest point. Take note of the measurement, and you will have an accurate height measurement.
Measuring the Increase in Height
A caliper can be a useful tool for measuring the increase in height of high heels. This method involves using the caliper to measure the difference in height between the start of the heel and the highest point. By using a caliper, you can obtain precise measurements of the increase in height.
Measuring the Pitch Angle
The pitch angle of a high heel refers to the angle between the ground and the front edge of the heel. This angle can affect the comfort and stability of the heels. To measure the pitch angle, use a caliper to measure the angle between the ground and the front edge of the heel. This will give you a better understanding of the pitch angle and its impact on the heels’ overall feel.
Measuring the Length of the Heel Platform
The length of the heel platform refers to the horizontal distance from the back of the heel to the front edge of the platform. This measurement can be useful when considering the stability and balance of high heels. To measure the length of the heel platform, use a measuring tape or a ruler to measure the distance along the sole of the shoe. By obtaining this measurement, you can assess the proportion and stability of the heel platform.
Tools and Equipment
Standard References
Standard references, such as shoe sizing charts and existing shoes with known heel heights, can be used as benchmarks for comparing and measuring high heels.
Measuring Tape
A measuring tape is a versatile tool that can be used to measure the height of high heels accurately. It is especially useful when measuring from the bottom of the heel to the top or from the floor to the heel.
Ruler
A ruler is a handy tool for measuring the height of high heels. It is commonly used to measure from the sole to the heel, providing a straightforward method for determining heel height.
Caliper
A caliper is a precise measuring tool commonly used in various fields, including engineering and manufacturing. It can be used to measure the increase in height and the pitch angle of high heels, allowing for more accurate and detailed measurements.
Level Surface
A level surface is necessary when measuring the height of high heels. It ensures that the measurements are not affected by any unevenness or incline.
Elevated Surface
An elevated surface, such as a table or platform, can be helpful when measuring the height of high heels from the bottom of the heel to the top. It provides a stable surface to place the shoes for more accurate measurements.
With these various methods and tools at your disposal, measuring the height of high heels becomes a straightforward and precise process. Whether you prefer using standard references or utilizing measuring tape, ruler, or caliper, you now have the means to determine the exact height and other relevant measurements of your favorite high heels. So, go ahead and embark on this measuring adventure to satisfy your curiosity and gain a better understanding of the fabulous high heels you love to wear. Happy measuring!
This image is property of images.squarespace-cdn.com.